NEWS

What are the benefits of using a simple freight elevator in a factory?


  What are the benefits of using a simple goods lift in a factory?

  Simple freight elevators are now widely used, and many businesses—and individuals—are starting to adopt them to improve production efficiency, especially in factories. The demand for simple freight elevators is on the rise. So, what are the benefits of using simple freight elevators in factories? And how do simple freight elevators in factories bring convenience to production?

  What are the benefits of using a simple goods lift in a factory?

  1. The simple freight elevator has a large load capacity, supports multi-point control, features interconnected up-and-down operation, and boasts a high safety factor.

  2. Simple freight elevators have relatively high lifting capacity for goods. They employ side cylinders or double-sided cylinders, ensuring smooth operation, quiet performance, easy maintenance, and a long service life.

  3. In the event of a power outage, the simple cargo elevator can be lowered manually. It is equipped with an emergency stop button, making it convenient, safe, and practical.

  4. The simple freight elevator doors can be interconnected, allowing seamless connection between inside and outside the factory, which is convenient and space-saving.

  5. The simple freight elevator is particularly suitable for steel-structure factory buildings with 2 to 6 floors. It can be used both indoors and outdoors, bringing convenience to factories.

  6. A simple goods lift can be installed in the hoistway. If there is no machine room above, the height of the top floor exceeds 2.5 meters. The machine room is located within the hoistway, within a radius of 15 meters, and occupies an area of only 3 to 4 square meters.

  7. The load and loading of the factory’s simple freight elevator are directly transmitted to the foundation pit via hydraulic cylinders, resulting in low requirements for shaft strength. Therefore, brick-masonry structures or composite structural shafts can be used.

  What potential adverse situations might arise from the early use of simple freight elevators?

  Installing simple freight elevators in factories, office floors, docks, and other locations may initially encounter certain issues. Using these simple freight elevators can also give rise to various problems. Dingjin Forklift will introduce these common issues, as well as provide solutions and preventive measures for them.

  First, leaks are likely to occur. Due to loose parts, vibrations, and the effects of heat on machinery, sealing surfaces and pipe joints may develop leaks. Some defects—such as those arising from casting or machining—can be difficult to detect during assembly and adjustment. However, under operating conditions, vibrations and impacts can expose these hidden defects, resulting in oil (or water) leaks. Consequently, leaks tend to occur more frequently during the running-in period.

  Next is inadequate lubrication. Newly assembled parts have small mating clearances, and due to factors such as fitting, it’s often difficult to ensure uniformity in these clearances. As a result, the lubricant (grease) struggles to form an even oil film on the friction surfaces, failing to effectively prevent wear. This reduces lubrication efficiency and leads to premature, abnormal wear of mechanical components. In severe cases, it can damage or seize the proper friction surfaces, resulting in equipment failure.

  The third type of loosening occurs when newly manufactured and assembled parts exhibit deviations in their geometric shapes and fit dimensions. In the initial stages of use, these parts are subjected to alternating loads such as impacts and vibrations, as well as effects from heat and deformation. Additionally, due to rapid wear and other factors, even parts that were originally tightly fastened tend to become loose.

  Fourth, simple freight elevators experience rapid wear. Affected by the machining, assembly, and adjustment of new mechanical components, the friction surfaces become rough, the contact area at mating surfaces is small, and the surface pressure is uneven. During operation, the protruding and recessed parts on the component surfaces interlock and grind against each other; metal chips that fall off act as abrasive agents, continuously participating in the friction process and accelerating the wear of the mating surfaces. As a result, components—especially mating surfaces—are prone to wear during the running-in period, and the rate of wear is significantly increased. At this stage, if the simple freight elevator is overloaded, it may lead to component damage or premature failure.