NEWS
Precautions for the Maintenance and Servicing of Zhejiang Lift Platforms
Zhejiang lifting platforms are widely used in factories, hotels, construction sites, shopping malls, railway stations, airports, sports venues, and other facilities. They can be employed for equipment maintenance, painting and decoration, replacement of lighting fixtures and electrical appliances, cleaning and upkeep, power line work, installation and maintenance of lighting and electrical systems, overhead pipeline installation and maintenance, and high-altitude cleaning operations. Zhejiang lifting platforms are powered by either two-phase or three-phase electricity and feature stepless speed regulation, making high-altitude work safer, more convenient, and quieter for users. They represent an ideal climbing equipment solution.

Precautions for the Maintenance of Zhejiang Lift Platforms:
1 When operating the Zhejiang lifting platform, it is mandatory to have professional drivers and operators who have undergone specialized training, passed the required examinations, and hold valid certificates before taking up their posts. Depending on the actual work conditions, the aforementioned personnel may concurrently hold multiple positions; however, those holding concurrent positions must possess employment certificates for each of their additional roles and obtain approval from their direct supervisor, while also assuming the corresponding responsibilities. After construction is completed, the flatbed trailer must be moved on-site, and the trailer should be operated by a qualified professional driver.
2 The driver of the Zhejiang lifting platform must perform all necessary inspections and maintenance according to the machinery maintenance procedures before starting the platform vehicle. Before beginning work, he should check the platform vehicle’s operating range and remove any obstacles that might impede its turning or movement.
3 The outriggers are an important preparatory step for operating the platform truck. A level ground should be selected. If the ground is soft or uneven, work may only commence after confirming that the actual stress on the road mats is correct.
4 Generally speaking, a flatbed truck should first raise the lower arm, then the middle arm, and finally the upper arm. When performing turning operations with a platform truck, the lower arm must be raised to a certain height before the turn can begin, and the turning process should be carried out slowly. Pay attention to whether the distances between each arm, the platform, and various devices meet safety requirements.
5 Workers on Zhejiang’s lifting platforms must wear safety belts. When working in electrified areas, the vehicle body must be grounded as required. The work controller is responsible for operating the platform vehicle’s uphill movement, and the platform vehicle operator should follow the guidelines provided. GB5082 The signal liaison platform operator must ensure that signals are clear and accurate.
6 Before operating the lifting platform in Zhejiang, the person in charge of the job shall provide technical and safety briefings to the platform operators and all personnel involved in the work. The briefing shall cover the following: the nature and requirements of the work; safety precautions and potential hazards; division of labor and scope of responsibility; additional safety precautions and potential hazards; division of labor and scope of responsibility. In addition to inspecting the condition of the vehicle and the workers’ tasks, the person in charge is also responsible for checking the terrain and environmental conditions to ensure that the lifting and lowering operations comply with the requirements of the safety technical measures or the previously formulated work plan. If any discrepancies are found, appropriate corrective measures must be developed before starting the work.
7 1. Inspect whether the rollers and guide rails of each moving joint on the lift platform, the intermediate shaft and bushing of the fork arms, the pin shafts of the hydraulic cylinders, the support plates, and the bearings are worn. Add lubricant to each moving joint. Check the quality and level of the hydraulic oil. If the hydraulic oil has darkened, become viscous, or contains foreign particles such as gravel, it should be replaced promptly. After the entire lift platform is raised, the hydraulic oil level should be above the mark indicated on the oil dipstick.
Relevant information