NEWS

The working principle of a hydraulic lift platform.


Hydraulic lifting platform The portable manual service platform is powered by either a single-phase or three-phase power supply. It features both manual and electric operation modes, and is also equipped with a manual hand pump for use in case of power failure. This series of service platforms boasts characteristics such as flexible mobility, stable lifting performance, and easy operation. They are primarily used in manufacturing plants, government offices, retail stores, and the decoration and interior design industries.
Hydraulic lifting platform This lifting platform equipment consists of a lifting mechanism, a hydraulic system, an electrically operated control system, and a support structure. Gear oil is pressurized by an axial piston pump and then flows through an oil filter, an explosion-proof electro-hydraulic directional control valve, a relief valve, a one-way throttle valve, and a static balance valve before entering the lower chamber of the hydraulic cylinder. This causes the cylinder’s piston rod to move upward, lifting the load. The oil returning from the upper chamber of the cylinder passes through the explosion-proof electro-hydraulic directional control valve and returns to the oil tank. The rated working pressure is adjusted via a flow control valve, and the pressure reading can be monitored using a pressure gauge.
The piston rod of the hydraulic cylinder moves downward, causing the load to lower. Gear oil flows into the upper chamber of the hydraulic cylinder via an explosion-proof electro-hydraulic directional control valve. From the lower chamber of the hydraulic cylinder, the pumped oil returns to the vehicle’s oil tank through a static balance valve, a one-way throttle valve, an overflow valve, and another explosion-proof electro-hydraulic directional control valve. To ensure stable lowering of the load and reliable braking performance, a static balance valve is installed in the oil-pumping circuit to balance the control loop and maintain constant working pressure, thereby preventing the lowering speed from being affected by changes in the load. The total flow rate is adjusted by the overflow valve to precisely control the lifting and lowering speed. To enhance the reliability of the braking system and prevent accidental failures, a one-way throttle valve—a hydraulic lock—is added to ensure that the load remains securely locked even if the hydraulic lines unexpectedly rupture. Additionally, an overloading voice-controlled alarm system has been installed to distinguish between overload conditions and common equipment malfunctions.
The automatic control system for household appliances operates the motor’s rotation based on the explosion-proof buttons SB1 through SB6 and adjusts the speed of the explosion-proof electro-hydraulic directional control valve to maintain the load at an elevated or reduced level. Additionally, the system regulates the delay time according to the “LOGO” program flow, thereby preventing frequent motor starts that could shorten its service life.