NEWS

What should I do if a hydraulic lift is leaking oil?


Ningbo Yinzhou XiongHao Machinery Co., Ltd. would like to inform you that the hydraulic system is the core component of a hydraulic lift. Hydraulic leakage is a common phenomenon encountered by users during the operation of hydraulic lifts. So, how should we address this issue when it arises? ?

Different manufacturers of rail-guided hydraulic lifts use hydraulic system components of varying quality. First, there are two scenarios: oil leakage. : Internal leaks and external leaks. Internal leaks are caused by the combination of the cylinder and the lifting support. Since internal leaks are not easy to address, the situation becomes even more complicated, requiring professional technicians for repair or replacement. Therefore, specialized maintenance and after-sales services are readily available on the market. We will primarily analyze the causes of hydraulic oil leakage from rail-type hydraulic lifts. :

1. Hydraulic oil operates in a sealed environment, and the pump station controls the pressure injected into the cylinder; atmospheric pressure is greater than... 12pa When the hydraulic oil is restricted, friction in the cylinder will generate heat. If the pressure at the high-pressure oil and expansion oil filling station pump is not properly tightened, hydraulic oil will leak.

2. An excessive number of oil lines and fittings can increase the risk of oil leaks. The pressure in oil lines is typically: 12pa The oil pipe fittings are typically connected via tees and paired wires. The inner diameter of the pipe is approximately 9 Millimeters—the inner diameter of the connector is only 7 Millimeters. If the inner tube of the oil circuit is too long, more fittings will increase the likelihood of oil leakage.

3. If the equipment cannot operate reliably over the long term, fails to maintain oil quality, and lacks proper maintenance and repair procedures, dust will accumulate on the inner walls of the pipelines, thereby increasing the pressure in the oil circuit. Aging of the sealing rings between the composite gasket and the metal wire and the fittings will increase the likelihood of oil leaks. When using this product, users must regularly inspect and maintain the rail lift according to the product instructions, replace the hydraulic oil twice a year, and carefully follow the operating procedures outlined in the equipment’s factory manual for replacement tasks.

The above are some factors related to oil leaks in rail-type lifts. It is essential to perform regular daily use and maintenance, as well as promptly identify and address any leaks. If your hydraulic lift is leaking oil, first stop operation and proceed with replacement. Spare parts equipped with seals are provided.

Ningbo Yinzhou XiongHao Machinery Co., Ltd. is a manufacturer of hydraulic lifts with high-quality products. Welcome to visit and make your purchase!