NEWS
Electric Platform Operating Procedures
Electric Platform Operating Procedures
An electric platform is a versatile loading and unloading machinery device. The lifting system of the electric platform is hydraulically driven. The scissor-type mechanical structure gives the lifting platform high stability, a wide operating platform, and a strong load-bearing capacity, thereby expanding the working range at the upper level and making it suitable for multiple workers to operate simultaneously. It makes work in high-altitude areas more efficient and safer.

General Classification of Lift Platforms : Fixed and mobile. Fixed. : Scissor lift platforms, chain lift platforms, and loading and unloading platforms. Divided into: : Hydraulic lifts, hydraulic lifting platforms, four-wheel mobile lifting platforms, two-wheel traction lifting platforms, vehicle-modified lifting platforms, manual push-type lifting platforms, AC/DC dual-purpose lifting platforms, battery-powered vehicle lifting platforms, self-propelled lifting platforms, diesel-engine articulated-arm self-propelled lifting platforms, foldable-arm lifting platforms, cylinder-type lifting platforms, aluminum alloy lifting platforms—lifting heights ranging from... 1 Rice to 30 Meter. Specific classification of electric platforms : Standard electric platform, dual-shear electric platform, ultra-low electric platform, large-worktable electric platform, small-worktable electric platform, you Electric platform of type X
The electric platform has been thoroughly tested and verified before leaving the factory, and all technical specifications meet the design requirements. When using the platform, simply connect it to the power supply—no adjustments to the hydraulic or electrical systems are necessary. Before operating the platform, carefully inspect the hydraulic and electrical systems to ensure there are no leaks or exposed components. When using the lifting platform, make sure the four legs are firmly supported on a solid surface. ( Based on the criterion that the walking wheels will leave the ground. ) Rail sleepers may be used when necessary. The lifting platform should run empty. 1-3 It can be loaded in one go. The center of gravity of the load should be as close to the center of the workbench as possible.
The movable doors at both ends of the guardrail must be closed and locked before operation. During use, turn the oil-return valve knob clockwise to release it, then push the manual directional-control valve lever to the neutral position, start the motor to activate the system, and subsequently pull the directional-control lever to the lifting position. Once the lift platform reaches the desired height, push the directional-control lever back to the neutral position again. The lift platform will then stop rising and the motor will shut down automatically, allowing you to proceed with work. When lowering the platform, simply release the oil-return valve. ( Rotate counterclockwise ) The platform can fall according to its weight. ( Note : The motor cannot be reversed. ) When using the manual pump, first tighten the return oil valve knob clockwise, push the handle to the neutral position, and then press the handle platform upward to raise the load. To lower the load, release the return oil valve and allow the platform to descend.
That’s all for today on the operating procedures for the electric platform. We’ll share more details with you in future updates. If you’re interested in purchasing platform products, feel free to get in touch with us—we’ll be happy to provide you with the products you need.
Relevant information