NEWS
Lift: Correct Operating Procedures for Using a Lift
Operation Elevator The correct operating steps:
1. Adjustment Elevator The height of the support legs, to keep the lift platform level; (This lift is not supported; lifting is strictly prohibited.) When working on a sloped surface, in addition to using support feet, you must also place wooden blocks under the wheels. Such items can prevent accidental rollovers.
2. In addition to checking whether the power cord is properly connected, you must also securely fasten and tighten the wall-mounted power supply at the chromatography column distributor to prevent it from being accidentally pulled by passing pedestrians.
3. Move the limit switch to the designated working position and secure it, then check whether the ground is stable.
4. First, drain the engine completely, then perform a trial run to check for any abnormal conditions, and strictly prohibit overloading.
5. Before starting work, the operator must fasten their seatbelt, adjust it to the proper position, and focus their attention.
6. Elevator After startup, no one is allowed to stand below the work area or within the radius of the elevator’s baseplate. Within 2 meters.
7. Strictly prohibited in Elevator Storing flammable and explosive items indoors. Tools, items, or contents that employees carry with them at all times during high-altitude work must be securely fastened to prevent them from falling and causing injury.
8. Elevator When descending, there must be One staff member waits until the elevator comes to a stop before stepping off.
9. After completion, even after cleaning and maintenance, staff should support the legs to prevent damage to the tires.
Safety is no small matter; we must take preventive measures before problems arise. Elevator Proper operation is not only essential to avoid malfunctions during operation and extend the service life of equipment, but also crucial for the personal safety of operators. We hope that most users will perform their duties carefully when operating the elevator. Before inspection, the lift equipment must be operated strictly according to the correct operating procedures.
Ningbo Yinzhou XiongHao Machinery Co., Ltd. is a Ningbo hydraulic lift manufacturer specializing in the production of hydraulic lifts and hydraulic lifting platforms. Welcome to visit and make your purchase!
Service is endless.
We look forward to serving you.
If you have any questions, please leave your information.
XiongHao Machinery Technology(XiangShan) Co.,Ltd.
Address: Xizetang Industrial Zone, Xianxiang Town, Xiangshan County, Zhejiang Province
Contact Information
Phone:+86-15867878936 +86-574-88079868
Email:wang@nbxhmachinery.com
Copyright © XiongHao Machinery Technology(XiangShan) Co.,Ltd. All rights reserved Powered by www.300.cn SEO
QR code